Salut à tous,
C'est arrivé comme ça, du jour au lendemain presque.
Dés que mon PC est sous pression, rendu 3D, jeux trop poussifs, c'est le crash.
J'ai lancé le diagnostique de la mémoire intégré à W10, rien n'est sorti.
Je doute que ce soit un PSU, j'ai une EVO 650W pour:
-1080 TI (MSI)
-Ryzen 2700X
-3 SATA (2 ssd / 1 hdd)
-1 NVMe
-4 x 8 GB de RAM
Il me faut environ 550W pour faire tourner tout ça d’après les sites de calcul sur le besoin d'alim.
Donc reste soit la CG qui merde sous pression, soit le proc.
Du coté de l'event viewer, j'ai bien un critical event dans le system:
Je me retrouve dans le scénario 3 ici:
https://docs.microsoft.com/en-us/win...-id-41-restart
Je n'overclock pas et j'ai vérifié la mémoire. Me reste les deux solutions qui suivent, mais je ne sais pas comment faire pour garder un log de la température des composants qui tiendrait en cas de crash.Typically, the symptoms described in this scenario indicate a hardware problem. To help isolate the problem, do the following:
- Disable overclocking. If the computer has overclocking enabled, disable it. Verify that the issue occurs when the system runs at the correct speed.
- Check the memory. Use a memory checker to determine the memory health and configuration. Verify that all memory chips run at the same speed and that every chip is configured correctly in the system.
- Check the power supply. Verify that the power supply has enough wattage to appropriately handle the installed devices. If you added memory, installed a newer processor, installed additional drives, or added external devices, such devices can require more energy than the current power supply can provide consistently. If the computer logged Event ID 41 because the power to the computer was interrupted, consider obtaining an uninterruptible power supply (UPS) such as a battery backup power supply.
- Check for overheating. Examine the internal temperature of the hardware and check for any overheating components.
If you perform these checks and still cannot isolate the problem, set the system to its default configuration and verify whether the issue still occurs.
Vous avez des idées ou des pistes à explorer ? J'ai reformaté la bête et toujours le même soucis. Vu que j'ai monté le PC moi même il y a environ 1 an je vais vérifier la pâte thermique sur le proc au cas ou.